-
Give into your deepest desire for power. Work it out how you want with the bridgeable amps. 4 speaker channels or multiple subwoofer leads. Just consider the consequences whatever you do: pure and clean, distortion-free power. They ignite your system, but keep the heat under wraps. Techno wonders, these amps will rumble you to the core.
-
This new amplifier would be ideal if you want a single amplifier to power up both front and rear speakers without the need to add extra components such as crossovers.
-
PRODUCT FEATURES
-
Bridgeable 4-channel capability 4 x 120 W or 2 x 300 W (Max. Power)
-
Continuous output power: 4 x 60 W or 2 x 150 W (4 ohm) 4 x 75 W (2 ohm)
-
4 x 80 W or 2 x 230 W (4 ohm) DIN Power (DIN 45324, +B = 14.4 V)
-
Load impedance capability (2 — 8 ohm)
-
Variable LPF( -12 dB/Oct): 40 - 120 Hz
-
High Voltage Input capability (200 mV — 6.5 V)
-
Type Bridgeable Power Amplifier
-
PWM regulated MOSFET power supply Yes
-
Channels 4
-
Input level/gain control Yes
-
Load impedance capability 2 - 8 Ohm
-
RCA terminals Yes (input/output)
-
Speaker Terminals Screw-type
-
Power / ground terminals Large screw-type
-
LPF 40 - 120Hz (Variable)
-
HPF 40 - 120Hz (Variable)
-
High voltage input capability 200 mV - 6.5 V
-
High performance balanced isolator circuit Yes
-
Maximum Output Power 4 x 120 Watt or 2 x 300 Watt (4 ohms)
-
DIN power output (W) (DIN45324, +B = 14.4V) 4 x 80 Watt or 2 x 230 Watt (4 ohms)
-
Continuous power output (RMS) 4 x 60 Watt or 2 x 150 (14.4V (20-20kHz/4ohms) 4 x 60 Watt or 2 x 150 (14.4V (20 20kHz/2ohms))
-
Frequency response 10 Hz - 50.000 Hz
-
Distortion 0,010 %
-
S/N ratio > 95 dB
-
High Voltage Input Capability 200 mV - 6.5 V
-
Max. current consumption (A/4ohms) 35 A
-
Chassis size (W x H x D) 300 x 60 x 327 mm
-
Unit weight 4.7 kg
