Give into your deepest desire for pure, clean, distortion-free power. They ignite your system, but keep the heat under wraps. For an extra punch, there's the GM-7100M mono amp complete with a remote for extra bass on demand. Techno wonders, these amps will rumble you to the core. The GM-7100M continually monitors and adjust the power supply voltage rails for, clean output. It also features a selectable 50 Hz bass boost to give you more control over the punch from your subwoofers. For added flexibility, a variable low-pass crossover lets you set the levels at which higher-frequency signals will be filtered out, so that the remaining lower-frequency signals get sent straight to your subwoofer

• PRODUCTS FEATURES
• Mono channel capability 1 x 800 (2 ohm) W or 1 x 500 W (4 ohms) (Max. Power)
• Continuous output power: 1 x 360 W (2 ohms) or 1 x 250 W (4 ohms)
• 1 x 380 W (4 ohm) DIN Power (DIN 45324, +B = 14.4 V)
• Load impedance capability (2 — 8 ohms)
• Variable LPF( -12 dB/Oct): 40 - 240 Hz
• High Voltage Input capability (200 mV — 6.5 V)
• Type Mono Channel Amplifier
• PWM regulated MOSFET power supply Yes
• Channels 1
• Input level/gain control Yes
• Load impedance capability 2 - 8 Ohm
• Bass Boost 50 Hz
• 0/6/9/12 dB (Remote)
• RCA input terminals Yes
• Speaker Terminals Screw-type
• Power / ground terminals Large screw-type
• LPF 40 - 240Hz (Variable)
• High voltage input capability 200 mV - 6.5 V
• High performance balanced isolator circuit Yes
• Maximum Output Power 1 x 500 Watt (4 ohms) or 1 x 800 Watt (2 ohms)
• DIN power output (W) (DIN45324, +B = 14.4V) 1 x 380 Watt (4 ohms)
• Continuous power output (RMS) 1 x 250 Watt (20 - 240Hz/4ohms)
• 1 x 360 Watt (20 - 240Hz/2ohms)
• Frequency response 10 Hz - 240 Hz
• Distortion 0,030 %
• S/N ratio > 100 dB
• High Voltage Input Capability 200 mV - 6.5 V
• Max. current consumption (A/4ohms) 33 A
• Chassis size (W x H x D) 300 x 60 x 327 mm
• Unit weight 4.7 kg