High power and high-quality sound go hand-in-hand with this Pioneer 4-channel bridgeable amplifier selection. Its sturdy, durable design is versatile yet stylish. The MOSFET driven power supply is able to drive 4 separate speaker channels as well as difficult multiple subwoofer leads for distortion-free sound.

• PRODUCT FEATURES
• Bridgeable 4-channel capability 4 x 100 W or 2 x 240 W (4 ?) (Max. Power)
• Continuous output power: 4 x 50 W or 2 x 120 W (4 ohm) 4 x 60 W (2 ohm)
• 4 x 75 W or 2 x 200 W (4 ohm) DIN Power (DIN 45324, +B = 14.4 V)
• Load impedance capability (2 — 8 ohm)
• Variable LPF (-12 dB/Oct) 40 — 120 Hz
• Variable HPF (-12 dB/Oct) 40 — 120 Hz
• PWM regulated MOSFET power supply
• Input level/gain control Yes
• Load impedance capability 2 - 8 Ohm
• RCA terminals Yes (input/output)
• Power / ground terminals Large screw-type
• LPF 40 - 120 Hz (Variable)
• HPF 40 - 120 Hz (Variable)
• High performance balanced isolator circuit
• DIN power output (W) -(DIN45324, +B = 14.4V) 4 x 75 Watt or 2 x 200 Watt (4 ohms)
• Cont. power output (RMS), - 14.4V (20-20kHz/4ohms) 4 x 50 Watt or 2 x 120 Watt
• Cont. power output (RMS), - 14.4V (20-20kHz/2ohms) 4 x 60 Watt
• Frequency response 10 Hz - 50.000 Hz
• Distortion 0,008 %
• S/N ratio 95 dB
• High Voltage Input Capability 400 mV - 6.5 V
• Max. current consumption (A/4ohms) 27.1
• Chassis size (W x H x D) 300 x 61 x 324 mm
• Unit weight 5.2 kg
• MOSFET Power Supply: Gives significant advantages over conventional bipolar output devices. Input power is applied with greater efficiency, stability and switching speed. It boosts direct current from batteries more efficiently and supplies high current at the amplifying stage. The end result is for high-quality sound at peak power output with less distortion and noise.
• Hi-Volt Inputs: All of Pioneer's bridgeable amplifiers have an Input Level Control, which is adjustable over 6.5 volts of input signal. This means that all Pioneer amplifiers pick up signals from Hi-Volt headunits of line drivers, without any clipping.