-
PRODUCT FEATURES
-
Bridgeable 2-channel capability 2 x 250 W or 1 x 760 W (Max. Power)
-
Continuous output power: 2 x 125 W or 1 x 380 W (4) 2 x 190 W (2)
-
2 x 175 W or 1 x 530 W (4 ?) DIN Power (DIN 45324, +B = 14.4 V)
-
Load impedance capability (2 — 8)
-
LPF: 80 Hz, -12 dB/Oct
-
High Voltage Input capability (200 mV — 6.5 V)
-
Bridgeable Power Amplifier
-
PWM regulated MOSFET power supply
-
Input level/gain control Yes
-
Load impedance capability 2 - 8 Ohm
-
Speaker Terminals Screw-type
-
Power / ground terminals Large screw-type
-
LPF 80 Hz
-
High performance balanced isolator circuit
-
Maximum Output Power 2 x 175 W or 1 x 530 W (4 ohm)
-
Cont. power output (RMS), 14.4V (20-20kHz/4ohms) 2 x 125 Watt or 1 x 380 Watt
-
Cont. power output (RMS), 14.4V (20-20kHz/2ohms) 2 x 190 Watt
-
Frequency response 10 Hz - 50.000 Hz
-
Distortion 0,008 %
-
S/N ratio 100 dB
-
High Voltage Input Capability 200 mV - 6.5 V
-
Max. current consumption (A/4ohms) 25
-
Chassis size (W x H x D) 300 x 61 x 324 mm
-
Unit weight 5.5 kg
-
MOSFET Power Supply: Gives significant advantages over conventional bipolar output devices. Input power is applied with greater efficiency, stability and switching speed. It boosts direct current from batteries more efficiently and supplies high current at the amplifying stage. The end result is for high-quality sound at peak power output with less distortion and noise.
-
Hi-Volt Inputs: All of Pioneer's bridgeable amplifiers have an Input Level Control, which is adjustable over 6.5 volts of input signal. This means that all Pioneer amplifiers pick up signals from Hi-Volt headunits of line drivers, without any clipping.
