-
PRODUCT FEATURES
-
Bridgeable 2-channel capability 2 x 80 W or 1 x 200 W (Max. Power)
-
Continuous output power: 2 x 40 W or 1 x 100 W (4 ?) 2 x 50 W (2)
-
2 x 60 W or 1 x 150 W (4 ?) DIN Power (DIN 45324, +B = 14.4 V)
-
Load impedance capability (2 — 8 ?)
-
LPF: 80 Hz, -12 dB/Oct
-
High Voltage Input capability (400 mV - 6.5 V)
-
Type Bridgeable Power Amplifier
-
PWM regulated MOSFET power supply
-
Input level/gain control Yes
-
Load impedance capability 2 - 8 Ohm
-
Speaker Terminals Screw-type
-
Power / ground terminals Large screw-type
-
LPF 80 Hz
-
High performance balanced isolator circuit
-
Speaker level input (A and B channel)
-
Maximum Output Power 2 x 60 Watt or 1 x 150 Watt (4 ohms)
-
Cont. power output (RMS), 14.4V (20-20kHz/4ohms) 2 x 40 Watt or 1 x 100 Watt
-
Cont. power output (RMS), 14.4V (20-20kHz/2ohms) 2 x 50 Watt
-
Frequency response 10 Hz - 45.000 Hz
-
Distortion 0,008 %
-
S/N ratio 100 dB
-
High Voltage Input Capability 400 mV - 6.5 V
-
Max. current consumption (A/4ohms) 11.3
-
Chassis size (W x H x D) 300 x 61 x 157 mm
-
Unit weight 2.6 kg
-
MOSFET Power Supply: Gives significant advantages over conventional bipolar output devices. Input
-
power is applied with greater efficiency, stability and switching speed. It boosts direct current from
-
batteries more efficiently and supplies high current at the amplifying stage. The end result is for high
-
quality sound at peak power output with less distortion and noise.
-
Hi-Volt Inputs: All of Pioneer's bridgeable amplifiers have an Input Level Control, which is adjustable
-
over 6.5 volts of input signal. This means that all Pioneer amplifiers pick up signals from Hi-Volt
-
headunits of line drivers, without any clipping.
